Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
A delicate blend of biodegradable surfactants formulated for general use in hot water extraction cleaning of upholstery fabrics. Fab Clean has a mild pH of 8.5 and subject to pre-testing, is safe for use on most wet cleanable colourfast fabrics. pH Concentrate: 9.5 --- pH Diluted: 8.5
Thoroughly dry vacuum fabric before wet cleaning procedures.
Portable machines: Mix 15ml of Fab Clean per litre of warm to hot water
(1 to 66) in the machine solution tank.
Truck-mount units: Mix 1 litre of Fab Clean with 4 litres of water (1 to 4) to
make metering concentrate. Set flow meter at 2 to 4 GPH (1:100)
Always pretest fabric in an inconspicuous area with ready-to-use
solution, for colour fastness and possible colour or texture change before proceeding.
If colours bleed or colour change occurs, test with B109 Fibre & Fabric Rinse and use accordingly.
If texture change occurs or fabric is sensitive to water, dry clean only.
Precondition heavily soiled areas with B108 Fabric Restorer or B107 Prespray Gold, according to label directions.
Extraction clean using a fine jet upholstery tool, with even over-lapping strokes.
Lightly spray clean fabric with B109 Fibre & Fabric Rinse solution, then finish with clean white towel.
WARNING. Causes serious eye irritation.
Keep out of reach of children.
Do not get in eyes, on skin, or on clothing.
Wear protective gloves / protective clothing / eye protection / face protection.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice / attention.
Please consult the Safety Data Sheet before using this product.